Igmp Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

IGMP Configuration
© Copyright Lenovo 2017
The following table describes the commands used to configure basic IGMP
parameters.
Table 293.
IGMP Configuration Options
Command Syntax and Usage
[no] ip igmp aggregate
Enables or disables IGMP Membership Report aggregation.
Command mode: Global configuration
[no] ip igmp enable
Globally enables or disables IGMP.
Command mode: Global configuration
show ip igmp
Displays the current IGMP configuration parameters.
Command mode: All
The following sections describe the IGMP configuration options.
 "IGMP Snooping Configuration" on page 528
 "IGMP Relay Configuration" on page 530
 "IGMP Relay Multicast Router Configuration" on page 531
 "IGMP Static Multicast Router Configuration" on page 532
 "IGMP Filtering Configuration" on page 533
 "IGMP Advanced Configuration" on page 535
 "IGMP Querier Configuration" on page 536
Chapter 4: Configuration Commands
527