Lenovo RackSwitch G8264CS Cli Command Reference page 326

326
G8264CS Command Reference for ENOS 8.4
Table 148.
LDAP Server Configuration Options (continued)
Command Syntax and Usage
[no] ldap­server enable
Enables or disables the LDAP server.
Command mode: Global configuration
ldap­server group­filter <LDAP groups>
Configures a list of LDAP groups to be searched for login permissions.
Multiple groups must be separated by commas.
Note: This option is available only in LDAP enhanced mode.
Command mode: Global configuration
no ldap­server group­filter
Removes the list of LDAP groups searched for login permissions.
Note: This option is available only in LDAP enhanced mode.
Command mode: Global configuration
ldap­server host <LDAP server number (1‐4)> <IP address or hostname>
[port <UDP port number(1‐65535)>] [data­port|mgt­port]
Configures up to four external LDAP servers.
The default UDP port used by LDAP is 389.
Note: The IP address and port number of a LDAP server must be non‐zero.
Note: This option is available only in LDAP enhanced mode.
Command mode: Global configuration
no ldap­server host <LDAP server number (1‐4)>
Removes the specified external LDAP server.
Note: This option is available only in LDAP enhanced mode.
Command mode: Global configuration
ldap­server port <UDP port number (1‐65000)>
Enter the number of the UDP port to be configured.
The default port is 389.
Note: This option is available only in LDAP legacy mode.
Command mode: Global configuration
default ldap­server port
Resets the LDAP server port to the default port number ‐ 389.
Command mode: Global configuration
ldap­server primary­host <IPv4 address> [data­port|mgt­port]
Configures the primary LDAP server with an IPv4 address.
Note: This option is available only in LDAP legacy mode.
Command mode: Global configuration