Lenovo RackSwitch G8264CS Cli Command Reference page 153

Port Transceiver Status
© Copyright Lenovo 2017
The following command displays the status of the transceiver module on each
port:
show interface transceiver
Command mode: All
Port Link Transceiver Vendor Part Approve
­­­­­­­­­­­­ ­­­­­ ­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­ ­­­­­­­­
1 Q10G 1.A < NO Device Installed >
2 Q10G 1.B < NO Device Installed >
3 Q10G 1.C < NO Device Installed >
4 Q10G 1.D < NO Device Installed >
5 Q10G 2.A Down UnEqQD 3.0m BLADE NETWORK BN­QS­QS­CBL­3M Accepted
6 Q10G 2.B Down UnEqQD 3.0m BLADE NETWORK BN­QS­QS­CBL­3M Accepted
7 Q10G 2.C Down UnEqQD 3.0m BLADE NETWORK BN­QS­QS­CBL­3M Accepted
8 Q10G 2.D Down UnEqQD 3.0m BLADE NETWORK BN­QS­QS­CBL­3M Accepted
9 Q10G 3.A LINK UnEqQD 5.0m IBM­Amphenol 00D5814­N13692 Accepted
10 Q10G 3.B LINK UnEqQD 5.0m IBM­Amphenol 00D5814­N13692 Accepted
11 Q10G 3.C LINK UnEqQD 5.0m IBM­Amphenol 00D5814­N13692 Accepted
12 Q10G 3.D LINK UnEqQD 5.0m IBM­Amphenol 00D5814­N13692 Accepted
13 Q10G 4.A < NO Device Installed >
14 Q10G 4.B < NO Device Installed >
15 Q10G 4.C < NO Device Installed >
16 Q10G 4.D < NO Device Installed >
17 SFP+ 1 LINK SR_SFP+ 850nm BLADE NETWORK BN­CKM­SP­SR Approved
18 SFP+ 2 < NO Device Installed >
19 SFP+ 3 < NO Device Installed >
20 SFP+ 4 < NO Device Installed >
21 SFP+ 5 < NO Device Installed >
22 SFP+ 6 < NO Device Installed >
23 SFP+ 7 < NO Device Installed >
24 SFP+ 8 < NO Device Installed >
25 SFP+ 9 < NO Device Installed >
26 SFP+ 10 < NO Device Installed >
27 SFP+ 11 < NO Device Installed >
28 SFP+ 12 < NO Device Installed >
This command displays information about the transceiver module on each port, as
follows:
 Port number and alias
 Link status
 Media/Transceiver type (LX, LR, SX, SR, DAC, PasDAC) and laser wavelength,
in nanometers
 Vendor name
Part number

 Approval status
Chapter 2: Information Commands
153