Chapter 3. Statistics Commands - Lenovo RackSwitch G8264CS Cli Command Reference

Chapter 3. Statistics Commands

© Copyright Lenovo 2017
You can use the Statistics Commands to view switch performance statistics in both
the user and administrator command modes. This chapter discusses how to use the
command line interface to display switch statistics.
Table 85.
Statistics Commands
Command Syntax and Usage
show counters
Dumps all switch statistics. Use this command to gather data for tuning and
debugging switch performance. If you want to capture dump data to a file, set
your communication software on your workstation to capture session data
prior to issuing the dump command. For details, see page
Command mode: All
show layer3 counters
Displays Layer 3 statistics.
Command mode: All
show ntp counters
Displays Network Time Protocol (NTP) Statistics. See page
output and a description of NTP Statistics.
Command mode: All
show snmp­server counters
Displays SNMP statistics. See page
Command mode: All
clear cpu
Clears all CPU utilization statistics.
Command mode: Privileged EXEC
clear counters
Clears all statistics for all interfaces.
Command mode: Privileged EXEC
clear interface port <port alias or number> counters
Clears all statistics for the specified port.
Command mode: All
clear mp­counters
Clears all MP‐related statistics.
Command mode: Privileged EXEC
289 for sample output.
295.
293 for a sample
193