FC Port Information
190
G8264CS Command Reference for ENOS 8.4
The following command displays information about FC ports:
show interface fc information
Command mode: All
Alias Port Admin Oper Login Config Running Link Link
State State Status Type Type Status Speed
53 53 Online Online LoggedIn F F Active 4Gb/s
54 54 Online Offline NotLoggedIn F F Active 4Gb/s
55 55 Online Offline NotLoggedIn F Unknown Inactive Unknown
56 56 Online Offline NotLoggedIn F Unknown Inactive Unknown
57 57 Down Downed NotLoggedIn Eth Eth Inactive Unknown
58 58 Down Downed NotLoggedIn Eth Eth Inactive Unknown
59 59 Down Downed NotLoggedIn Eth Eth Inactive Unknown
60 60 Down Downed NotLoggedIn Eth Eth Inactive Unknown
61 61 Down Downed NotLoggedIn Eth Eth Inactive Unknown
62 62 Down Downed NotLoggedIn Eth Eth Inactive Unknown
63 63 Down Downed NotLoggedIn Eth Eth Inactive Unknown
64 64 Online Downed NotLoggedIn Eth Eth Inactive Unknown
Fibre Channel port information includes the following:
Table 84.
Fibre Channel Port Information Descriptions
Parameter
Description
Alias
Port alias
Port
Port number
Admin State
Configured state of the port (online, offline, or down)
Oper State
Current operational state of the port (online, offline, or
downed)
Login Status
Login status of the port on the FC fabric (LoggedIn or
NotLoggedIn)
Config Type
Configured FC port type, as follows:
Running Type
Current operational FC port type, as follows:
Link Status
Current status of the port link (Active or Inactive)
Link Speed
Current operational link speed.
E (Expansion port) **not supported
F (Fabric port)
Eth (Ethernet port)
E (Expansion port) **not supported
F (Fabric port)
Eth (Ethernet port)
Unknown