Port Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

Port Configuration
© Copyright Lenovo 2017
Use the Port Configuration commands to configure settings for interface ports.
Table 170.
Port Configuration Options
Command Syntax and Usage
interface port <port alias or number>
Enter Interface port mode.
Command mode: Global configuration
interface portchannel {<1‐64>|<65‐128>|lacp <1‐65535>}
Enter Interface portchannel mode. These commands allow you to configure
port parameters for all port members in the selected Link Aggregation Group
(LAG).
Command mode: Global configuration
[no] bpdu­guard
Enables or disables BPDU guard, to avoid Spanning‐Tree loops on ports
configured as edge ports.
Command mode: Interface port/Interface portchannel
description <1‐64 characters>
Sets a description for the port. The assigned port description appears next to
the port number on some information and statistics screens.
The default is set to the port number.
Command mode: Interface port/Interface portchannel
no description
Removes the interface description.
Command mode: Interface port/Interface portchannel
dot1p <0‐7>
Configures the port's 802.1p priority level.
Command mode: Interface port/Interface portchannel
dot1x
Configures 802.1X port‐based authentication. For more command options, see
page 409.
Command mode: Interface port
[no] dscp­marking
Enables or disables DSCP re‐marking on a port.
Command mode: Interface port/Interface portchannel
Chapter 4: Configuration Commands
359