Link Aggregation Control Protocol - Lenovo RackSwitch G8264CS Cli Command Reference

Link Aggregation Control Protocol
60
G8264CS Command Reference for ENOS 8.4
The following command displays LACP information:
show lacp information
Command mode: All
port mode adminkey operkey selected prio aggr trunk status minlinks
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
1 active 65535 65535 yes 32768 1 65 up 1
2 active 65535 65535 yes 32768 1 65 up 1
3 active 65535 65535 individual 32768 ­­ ­­ down 1
4 active 65535 65535 yes 32768 1 65 up 1
5 active 65535 65535 yes 32768 1 65 up 1
6 active 65535 65535 yes 32768 1 65 up 1
7 active 65535 65535 yes 32768 1 65 up 1
8 active 65535 65535 yes 32768 1 65 up 1
9 active 1000 1000 suspended 32768 ­­ ­­ down 1
10 active 1000 1000 suspended 32768 ­­ ­­ down 1
...
(*) LACP PortChannel is statically bound to the admin key
LACP dump includes the following information for each port in the G8264CS:
mode
 Displays the port's LACP mode (active, passive or off).
adminkey
Displays the value of the port's adminkey.

operkey
 Shows the value of the port's operational key.
selected
 Indicates whether the port has been selected to be part of a
Link Aggregation Group.
prio
 Shows the value of the port priority.
aggr
 Displays the aggregator associated with each port.
trunk
 This value represents the LACP Link Aggregation Group
(LAG) number.
status
 Displays the status of LACP on the port (up or down).
minlinks
Displays the minimum number of active links in the LACP

Link Aggregation Group (LAG).