Lenovo RackSwitch G8264CS Cli Command Reference page 431

ECP Configuration
© Copyright Lenovo 2017
Use the following commands to configure Edge Control Protocol (ECP).
Table 224.
ECP Configuration Options
Command Syntax and Usage
ecp retransmit­interval <100‐9000>
Configures ECP retransmit interval in milliseconds.
The default value is 1000 miliseconds.
Command mode: Global configuration
default ecp retransmit­interval
Resets the ECP retransmit interval to the default 1000 milliseconds.
Command mode: Global configuration
show ecp [channels|retransmit­interval|
upper­layer­protocols]
Displays settings for the ECP retransmit interval or for all ECP channels or
registered ULPs.
Command mode: All
Chapter 4: Configuration Commands
431