Lenovo RackSwitch G8264CS Cli Command Reference page 492

492
G8264CS Command Reference for ENOS 8.4
Table 270.
OSPF Virtual Link Configuration Options (continued)
Command Syntax and Usage
area­virtual­link <1‐3> neighbor­router <IP address>
Configures the router ID of the virtual neighbor.
The default value is 0.0.0.0.
Command mode: Router OSPF
area­virtual­link <1‐3> retransmit­interval <1‐3600>
Configures the retransmit interval, in seconds.
The default value is 5 seconds.
Command mode: Router OSPF
area­virtual­link <1‐3> transit­delay <1‐3600>
Configures the delay in transit, in seconds.
The default value is 1 second.
Command mode: Router OSPF
no area­virtual­link <1‐3>
Deletes OSPF virtual link.
Command mode: Router OSPF
show ip ospf area­virtual­link <1‐3>
Displays the current OSPF virtual link settings.
Command mode: All