Lenovo RackSwitch G8264CS Cli Command Reference page 457

© Copyright Lenovo 2017
Table 246.
Protocol VLAN Configuration Options (continued)
Command Syntax and Usage
protocol­vlan <protocol number (1‐8)> protocol <protocol type>
Selects a pre‐defined protocol, as follows:
decEther2:

ipv4Ether2:

ipv6Ether2:

ipx802.2:

ipx802.3:

ipxEther2:

ipxSnap:

netbios:

rarpEther2:

sna802.2:

snaEther2:

vinesEther2:

xnsEther2:

Command mode: VLAN
[no] protocol­vlan <protocol number (1‐8)> tag­pvlan
<port alias or number>
Adds or removes a port that will be tagged by the selected protocol on this
VLAN.
Command mode: VLAN
no protocol­vlan <protocol number (1‐8)>
Deletes the selected protocol configuration from the VLAN.
Command mode: VLAN
show protocol­vlan <protocol number (1‐8)>
Displays current parameters for the selected PVLAN.
Command mode: All
DEC Local Area Transport
Internet IP (IPv4)
IPv6
Novell IPX 802.2
Novell IPX 802.3
Novell IPX
Novell IPX SNAP
NetBIOS 802.2
Reverse ARP
SNA 802.2
IBM SNA Service on Ethernet
Banyan VINES
XNS Compatibility
Chapter 4: Configuration Commands
457