802.1X Information
54
G8264CS Command Reference for ENOS 8.4
The following command displays 802.1X information:
show dot1x information
Command mode: All
System capability : Authenticator
System status : disabled
Protocol version : 1
Guest VLAN status : disabled
Guest VLAN : none
Authenticator Backend Assigned
Port Auth Mode Auth Status PAE State Auth State VLAN
*1 forceauth unauthorized initialize initialize none
*2 forceauth unauthorized initialize initialize none
*3 forceauth unauthorized initialize initialize none
The following table describes the IEEE 802.1X parameters.
Table 20.
802.1X Parameter Descriptions
Parameter
Description
Port
Displays each port's alias.
Auth Mode
Displays the Access Control authorization mode for the
port. The Authorization mode can be one of the following:
Auth Status
Displays the current authorization status of the port, either
authorized or unauthorized.
Authenticator
Displays the Authenticator Port Access Entity State. The
PAE State
PAE state can be one of the following:
forceunauth
auto
forceauth
initialize
disconnected
connecting
authenticating
authenticated
aborting
held
forceAuth