Lenovo RackSwitch G8264CS Cli Command Reference page 128

IP Information
128
G8264CS Command Reference for ENOS 8.4
The following command displays Layer 3 information:
show ip interface brief
Command mode: All
IP information:
AS number 0
Interface information:
1: IP4 192.168.0.2 255.255.255.0 192.168.0.255, vlan 1, up
128: IP4 10.241.37.168 255.255.255.128 10.241.37.255, vlan 4095, up
Loopback interface information:
Default gateway information: metric strict
4: 10.241.37.254, up active
Default IP6 gateway information:
ECMP Hash Mechanism: dipsip
Current BOOTP relay settings: OFF
Global servers:
­­­­­­­­­­­­­­­­­­­­­­­­­
Server 1 address 0.0.0.0
Server 2 address 0.0.0.0
Server 3 address 0.0.0.0
Server 4 address 0.0.0.0
Server 5 address 0.0.0.0
Current BOOTP relay option­82 settings: OFF
Current BOOTP relay option­82 policy: Replace
Current DHCP Snooping settings: Off
DHCP Snooping is configured on the following VLANs:
empty
Insertion of option 82 information is Disable
Interface Trusted Rate limit (pps)
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
1 No none
2 No none
3 No none
4 No none
...
62 No none
63 No none
64 No none
MGT No none
Current IP forwarding settings: ON, dirbr disabled, noicmprd disabled,
ICMPv6 redirect disabled
Current network filter settings: none
Current route map settings: none
RIP is disabled.
OSPF is disabled.
Current OSPFv3 settings: OSPFv3 is disabled.
Current PIM settings: OFF
BGP is disabled.