System Access Configuration
346
G8264CS Command Reference for ENOS 8.4
The following table describes the System Access commands.
Table 160.
System Access Configuration Options
Command Syntax and Usage
[no] access http enable
Enables or disables HTTP (Web) access to the Browser‐Based Interface.
The default settings is enabled.
Command mode: Global configuration
access http port <TCP port number (1‐65535)>
Sets the switch port used for serving switch Web content.
The default is HTTP port 80.
Command mode: Global configuration
default access http port
Resets the HTTP port to the default port number ‐ 80.
Command mode: Global configuration
access snmp {readonly|readwrite}
Enables read‐only/write‐read SNMP access.
Command mode: Global configuration
no access snmp
Disables SNMP access.
Command mode: Global configuration
[no] access telnet enable
Enables or disables Telnet access.
The default setting is enabled.
Command mode: Global configuration
access telnet port <TCP port number (1‐65535)>
Sets an optional Telnet server port number for cases where the server listens
for Telnet sessions on a non‐standard port.
Command mode: Global configuration
default access telnet port
Resets the Telnet server port to the default port number ‐ 23.
Command mode: Global configuration
access tftpport <TCP port number (1‐65535)>
Sets the TFTP port for the switch.
The default is port 69.
Command mode: Global configuration