Lenovo RackSwitch G8264CS Cli Command Reference page 186

186
G8264CS Command Reference for ENOS 8.4
Table 83.
Fibre Channel Information Commands
Command Syntax and Usage
show npv traffic­map
Displays NPV source‐destination traffic mapping. For details, see page
Command mode: All
show npv auto­disruptive­load­balance [<switch_number>]
Displays all VLANs that have automated disruptive load balance enabled.
Command mode: All
show zone
Lists all FC zones.
Command mode: All
show zone status
Displays FC zone status information. For details, see page
Command mode: All
show zone name <zone name>
Displays information for the specified FC zone.
Command mode: All
show zoneset
Lists all FC zonesets.
Command mode: All
show zoneset name <zoneset name>
Displays information for the specified FC zoneset.
Command mode: All
show zoneset active
Displays the currently active FC zoneset.
Command mode: All
show interface fc information
Displays FC port information. For details, see page
Command mode: All
show interface fc port <port alias or number>
Displays FC information for the specified ports.
Command mode: All
show topology
Displays fabric port information.
Command mode: All
189.
189.
190.