Lenovo RackSwitch G8264CS Cli Command Reference page 583

FC Zone Configuration
© Copyright Lenovo 2017
Use the following commands to configure Fibre Channel zones.
Table 345.
Fibre Channel Zone Configuration Commands
Command Syntax and Usage
zone name <1‐64 characters>
Enter FC Zone configuration mode for the specified zone. If the zone doesn't
exist, it is created.
Command mode: Global configuration
no zone name <1‐64 characters>
Deletes the specified FC Zone.
Command mode: Global configuration
zone clone <selected zone name> <new zone name>
Creates a new zone with the attributes of the selected zone.
Command mode: Global configuration
zone rename <current name> <new name>
Renames the FC zone.
Command mode: Global configuration
[no] zone default­zone permit
Permits or denies traffic flow to default zone members.
Command mode: Global configuration
[no] member {pwwn <pwwn>|fcid <ID number>|fcalias <alias ID>}
Adds or removes zone members based on:
pwwn: Port World Wide Number

fcid: FC ID of the port, in hex format (for example, 0xce00d1).

fcalias: Alias name of the FC device.

Command mode: FC Zone configuration
Chapter 4: Configuration Commands
583