Private Vlan Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

Private VLAN Configuration

458
G8264CS Command Reference for ENOS 8.4
Use the following commands to configure Private VLANs.
Table 247.
Private VLAN Options
Command Syntax and Usage
private­vlan association [add|remove] <secondary VLAN list>
Configures Private VLAN mapping between a primary VLAN and secondary
VLANs. If no optional parameter is specified, the list of secondary VLANs,
replaces the currently associated secondary VLANs. Otherwise:
add appends the secondary VLANs to the ones currently associated

remove excludes the secondary VLANs from the ones currently associated

Command mode: VLAN
[no] private­vlan community
Enables or disables the VLAN type as a community VLAN.
Community VLANs carry upstream traffic from host ports. A Private VLAN
may have multiple community VLANs.
Command mode: VLAN
[no] private­vlan isolated
Enables or disables the VLAN type as an isolated VLAN.
The isolated VLAN carries unidirectional traffic from host ports. A Private
VLAN may have only one isolated VLAN.
Command mode: VLAN
[no] private­vlan primary
Enables or disables the VLAN type as a Primary VLAN.
A Private VLAN must have only one primary VLAN. The primary VLAN
carries unidirectional traffic to ports on the isolated VLAN or to community
VLAN.
Command mode: VLAN
show vlan private­vlan [type]
Displays current parameters for the selected Private VLAN(s).
type lists only the VLAN type for each private VLAN: community, isolated,

or primary
Command mode: All