Autonomous System Filter Path Configuration
480
G8264CS Command Reference for ENOS 8.4
Note: The path number represents the AS path you wish to configure.
Table 262.
AS Filter Configuration Options
Command Syntax and Usage
aspathlist <1‐8> action {permit|deny}
Permits or denies Autonomous System filter action.
Command mode: Route map
aspathlist <1‐8> aspath <1‐65535>
Sets the Autonomous System filter's path number.
Command mode: Route map
[no] aspathlist <1‐8> enable
Enables or disables the Autonomous System filter.
Command mode: Route map
no aspathlist <1‐8>
Deletes the Autonomous System filter.
Command mode: Route map
show routemap <1‐64> aspathlist <1‐8>
Displays the current Autonomous System filter configuration.
Command mode: All