Ospf Host Entry Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

OSPF Host Entry Configuration
© Copyright Lenovo 2017
The following table describes the OSPF Host Entry commands.
Table 271.
OSPF Host Entry Configuration Options
Command Syntax and Usage
host <1‐128> address <IP address>
Configures the base IP address for the host entry.
Command mode: Router OSPF
host <1‐128> area <0‐5>
Configures the area index of the host.
Command mode: Router OSPF
host <1‐128> cost <1‐65535>
Configures the cost value of the host.
Command mode: Router OSPF
[no] host <1‐128> enable
Enables or disables the OSPF host entry.
Command mode: Router OSPF
no host <1‐128>
Deletes OSPF host entry.
Command mode: Router OSPF
show ip ospf host <1‐128>
Displays the current OSPF host entries.
Command mode: All
Chapter 4: Configuration Commands
493