© Copyright Lenovo 2017
The following protocols are regarded as secure. They are enabled on the switch in
both security modes, but cannot be disabled:
NTP Client version 4
LDAPS Client
The following protocols are unaffected by Secure Policy Mode:
SLP Discovery
IKE
IPSec
Ping and Ping IPv6
Traceroute and Traceroute IPv6
bootp
TFTP IPv6
SNMPv3 IPv6
To configure the switch policy mode, use the following command:
Table 375.
Security Policy Configuration
Command Syntax and Usage
boot securitypolicy {legacymode|securemode}
Configures the switch security policy.
Note: A switch reload is needed for the changes to take effect.
Command mode: Global configuration
show boot securitypolicy
Displays the current security policy configuration.
Command mode: All
625
Chapter 6: Boot Options