Lenovo RackSwitch G8264CS Cli Command Reference page 124

124
G8264CS Command Reference for ENOS 8.4
The following command displays VRRP information:
show ip vrrp information
Command mode: All
VRRP information:
1: vrid 2, 205.178.18.210, if 1, renter, prio 100, master
2: vrid 1, 205.178.18.202, if 1, renter, prio 100, backup
3: vrid 3, 205.178.18.204, if 1, renter, prio 100, master
When virtual routers are configured, you can view the status of each virtual router
using this command. VRRP information includes:
 Virtual router number
Virtual router ID and IP address

 Interface number
 Ownership status
owner identifies the preferred master virtual router. A virtual router is the

owner when the IP address of the virtual router and its IP interface are the
same.
renter identifies virtual routers which are not owned by this device.

Priority value. During the election process, the virtual router with the highest

priority becomes master.
 Activity status
master identifies the elected master virtual router.

backup identifies that the virtual router is in backup mode.

init identifies that the virtual router is waiting for a startup event.

For example, once it receives a startup event, it transitions to master if its
priority is 255, (the IP address owner) or transitions to backup if it is not the IP
address owner.