System Snmp Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

System SNMP Configuration
© Copyright Lenovo 2017
Lenovo N/OS supports SNMP‐based network management. In SNMP model of
network management, a management station (client/manager) accesses a set of
variables known as MIBs (Management Information Base) provided by the
managed device (agent). If you are running an SNMP network management
station on your network, you can manage the switch using the following standard
SNMP MIBs:
MIB II (RFC 1213)

 Ethernet MIB (RFC 1643)
Bridge MIB (RFC 1493)

An SNMP agent is a software process on the managed device that listens on UDP
port 161 for SNMP messages. Each SNMP message sent to the agent contains a list
of management objects to retrieve or to modify.
SNMP parameters that can be modified include:
 System name
 System location
 System contact
 Use of the SNMP system authentication trap function
Read community string

 Write community string
Trap community strings

Table 150.
System SNMP Options
Command Syntax and Usage
[no] snmp­server authentication­trap enable
Enables or disables the use of the system authentication trap facility.
The default setting is disabled.
Command mode: Global configuration
snmp­server contact <1‐64 characters>
Configures the name of the system contact. The contact can have a maximum
of 64 characters.
Command mode: Global configuration
no snmp­server contact
Deletes the name of the system contact.
Command mode: Global configuration
snmp­server host <trap host IP address> <trap host community string
(1‐33 characters)>
Adds a trap host server.
Command mode: Global configuration
Chapter 4: Configuration Commands
333