Rip Route Redistribution Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

RIP Route Redistribution Configuration
484
G8264CS Command Reference for ENOS 8.4
The following table describes the RIP Route Redistribution commands.
Table 265.
RIP Redistribution Options
Command Syntax and Usage
[no] redistribute {fixed|static|ospf|eospf|ebgp|ibgp}
{<1‐64>|all}
Adds or removes selected routing maps to the RIP route redistribution list. To
add specific route maps, enter routing map numbers, separated by a comma(,).
To add or remove all 64 route maps, type all.
The routes of the redistribution protocol matched by the route maps in the
route redistribution list will be redistributed.
Command mode: Router RIP
redistribute {fixed|static|ospf|eospf|ebgp|ibgp} export
<metric number (1‐15)>
Exports the routes of this protocol in which the metric and metric type are
specified.
Command mode: Router RIP
no redistribute {fixed|static|ospf|eospf|ebgp|ibgp} export
Stops exporting the routes of the specified protocol.
Command mode: Router RIP
show ip rip redistribute
Displays the current RIP route redistribute configuration.
Command mode: All