Initializing Parameter Settings - YASKAWA SGD7S series Product Manual

5.1.5

Initializing Parameter Settings

You can return the parameters to their default settings.
This function will not initialize the settings of the parameters that are adjusted for the Fn009,
Fn00A, Fn00B, Fn00C, Fn00D, Fn00E, and Fn00F utility functions.
To enable the new settings, turn the power supply to the SERVOPACK OFF and ON again after
you complete the operation.
Important
Preparations
Always check the following before you initialize the parameter settings.
• The parameters must not be write prohibited.
• The servo must be OFF.
Applicable Tools
The following table lists the tools that you can use to initialize the parameter settings and the
applicable tool functions.
Tool
Panel Operator
Digital Operator
SigmaWin+
Operating Procedure
Use the following procedure to initialize the parameter settings.
1.
Click the
maWin+.
2.
Select Edit Parameters in the Menu Dialog Box.
The Parameter Editing Dialog Box will be displayed.
3.
Select any parameter of the axis to initialize.
Function
Fn005
Fn005
Parameters - Edit Parameters
Servo Drive Button in the workspace of the Main Window of the Sig-
5.1 Manipulating Parameters (Pn)

5.1.5 Initializing Parameter Settings

Reference
13.4.5 Initialize Parameters (Fn005) on
page 13-16
Σ-7-Series Digital Operator Operating
Manual (Manual No.: SIEP S800001
33)
Operating Procedure on page 5-11
5
5-11