YASKAWA SGD7S series Product Manual page 597

14.1 List of Parameters
14.1.2 List of Parameters
Parameter
No.
Pn50C
14-24
Name
Input Signal Selections
2
3
/SPD-D (Motor Direction) Signal Allocation
0 Active when CN1-40 input signal is ON (closed).
1 Active when CN1-41 input signal is ON (closed).
2 Active when CN1-42 input signal is ON (closed).
3 Active when CN1-43 input signal is ON (closed).
4 Active when CN1-44 input signal is ON (closed).
5 Active when CN1-45 input signal is ON (closed).
6 Active when CN1-46 input signal is ON (closed).

n. X 7 The signal is always active.
8 The signal is always inactive.
9 Active when CN1-40 input signal is OFF (open).
A Active when CN1-41 input signal is OFF (open).
B Active when CN1-42 input signal is OFF (open).
C Active when CN1-43 input signal is OFF (open).
D Active when CN1-44 input signal is OFF (open).
E Active when CN1-45 input signal is OFF (open).
F Active when CN1-46 input signal is OFF (open).
/SPD-A (Internal Set Speed Selection Input) Signal Allocation
 
n. X
The allocations are the same as the /SPD-D (Motor Direction) sig-
0 to F
nal allocations.
/SPD-B (Internal Set Speed Selection Input) Signal Allocation
 
n. X
The allocations are the same as the /SPD-D (Motor Direction) sig-
0 to F
nal allocations.
/C-SEL (Control Selection Input) Signal Allocation

n.X
The allocations are the same as the /SPD-D (Motor Direction) sig-
0 to F
nal allocations.
Setting Setting Default
Range Unit Setting
0000 hex to 8888
−
FFFF hex hex
Continued from previous page.
Applicable When Classi-
Motors Enabled fication
After
All Setup
restart
Reference
page 6-54
Reference
page 6-54
Reference
page 6-54
Reference
page 6-58
Continued on next page.
Refer-
ence
−