YASKAWA SGD7S series Product Manual page 332

7.6 Convenient Function to Use during Trial Operation
7.6.1 Program Jogging
Operating Procedure
Use the following procedure for a program jog operation.
1.
Click the
2.
Select JOG Program in the Menu Dialog Box.
The Jog Program Dialog Box will be displayed.
3.
Read the warnings and then click the OK Button.
4.
Set the operating conditions, click the Apply Button, and then click the Run Button.
A graph of the operation pattern will be displayed.
7-24
Servo Drive Button in the workspace of the Main Window of the SigmaWin+.