YASKAWA SGD7S series Product Manual page 436

7.
Click the Result Writing Button if you want to set the measurement results in the param-
eters.
This concludes the procedure to set up Easy FFT.
Related Parameters
The following parameters are automatically adjusted or used as reference when you execute
Easy FFT.
Do not change the settings of these parameters during execution of Easy FFT.
Parameter
Pn408 Torque-Related Function Selections
Pn409 First Stage Notch Filter Frequency
Pn40A First Stage Notch Filter Q Value
Pn40C Second Stage Notch Filter Frequency
Pn40D Second Stage Notch Filter Q Value
Pn456 Sweep Torque Reference Amplitude
Yes: The parameter is automatically set.
No: The parameter is not automatically set, but the setting is read during execution.
Name Automatic Changes
8.14 Diagnostic Tools
8.14.2 Easy FFT
Yes
Yes
No
Yes
No
No
8
8-97