Powering Off The Server - Oracle X5-8 Service Manual

Powering Off the Server

This action activates the Locator indicator on the server front and back panel. For other
options, see
2. When at the server, set up an ESD-safe service space.
Set up a space where you can place components. The space needs to be ESD safe. See
"Performing Electrostatic Discharge and Static Prevention Measures" on page
Disconnect the server power cords.
3.
Caution -
in an immediate shut down of the server. Do not remove the power cord if the server is in full
power mode. Power off the server to standby power mode first.
4. If necessary, label and disconnect any other cables attached to the server back
panel.
If you plan to remove a component that has cables attached to it (SMOD, DPCC), label the port
or slot to which the cable is attached and remove the cable.
"Servicing the Server" on page 79
Next Steps ■
"Servicing Components" on page 113
■
Powering Off the Server
This section contains information and procedures related to power modes and power off
options, including complete power removal:
"Power Off the Server Using the Server OS" on page 101
■
100 Oracle Server X5-8 Service Manual • December 2015
"Managing the Locator Indicator" on page
Data loss. Removing the power cords when the server is in full power mode results
108.
90.