Oracle X5-8 Service Manual page 66

Troubleshoot Hardware Faults
after three successive unison blinks (see
component indicators.
Unison Steady On
For the unison steady on, all indicators are simultaneously on steady (see
On" on page
Test" on page
Alternating (Invalid FRU) Blink Rate
The alternating (invalid FRU) blink rate is a repeating sequence of lit green and amber
indicators at 1 Hz. This indicates that a component has an incorrect version or mismatch (for
example, a power supply with a lower rating than the one specified). The blink rate is also used
for an unsupported component, or a component in an unsupported slot.
66 Oracle Server X5-8 Service Manual • December 2015
62. This occurs during the front panel lamp test (see
62). This is the only time that the Locator indicator is on steady.
"Slow Unison Blink Rate" on page 65) of all the
"Steady
"Front Panel Lamp