Bios Setup Utility; Access The Bios Setup Utility - Oracle X5-8 Service Manual

BIOS Setup Utility

This section provides instructions for using the BIOS setup utility, which includes a menu-
driven user interface used to change BIOS settings. It includes:
"Access the BIOS Setup Utility" on page 237
■
"BIOS Setup Utility Screens" on page 238
■

Access the BIOS Setup Utility

To access the BIOS Setup utility, complete the following steps:
1. Power-on or power-cycle the server.
2.
Press the F2 key while the system is performing the power-on self-test (POST).
If there is an error during the boot process, you can press F1 to access the BIOS Setup
Note -
utility.
Alternatively, you can use the following hot key combinations to access the BIOS Setup utility
from a serial connection:
F1 Control-Q
■
F2 Control-E
■
F7 Control-D
■
F8 Control-P
■
F9 Control-O
■
F10 Control-S
■
F12 Control-N
■
The BIOS Setup utility Main screen appears
Use the direction arrows to navigate through the selections.
3.
("Main Screen (Legacy)" on page 238.
BIOS Setup Utility 237