Ethernet Port Device Naming; Getting Help - Oracle X5-8 Service Manual

The Serial Port Settings page appears.
Note -
4.
In the Serial Port Settings page, select Host Server as the serial port owner.
5.
Click Save for the changes to take effect.
6. Connect a serial host to the server.

Ethernet Port Device Naming

This section contains information about the device naming for the Ethernet ports on the back
panel of the server (see
Note -
devices are installed in the system.
The device naming for the Ethernet interfaces is reported differently by different interfaces
and operating systems. The following illustration explains the logical (operating system) and
physical (BIOS) naming conventions used for each interface. These naming conventions might
vary depending on conventions of your operating system and which devices are installed in the
server.
Port
Net 1
Net 0

Getting Help

The following sections describe how to get additional help to resolve server-related problems.
"Contacting Support" on page 76
■
"Locating the Chassis Serial Number" on page 76
■
The serial port sharing setting by default is Service Processor.
"Back Panel Ports and Connectors" on page
Naming used by the interfaces might vary from that listed below depending on which
BIOS
0701
0700
Oracle Solaris Linux
igb 1 eth 1
igb 0 eth 0
Troubleshooting and Diagnostics
Getting Help
45).
Windows
net2
net
75