Assign Serial Port Output Using the CLI
You can assign serial port output using either the Oracle ILOM web interface or the command-
line interface (CLI). For instructions, see the following sections:
"Assign Serial Port Output Using the CLI" on page 74
■
"Assign Serial Port Output Using the Web Interface" on page 74
■
Assign Serial Port Output Using the CLI
1.
Open an SSH session and at the command line log in to the SP Oracle ILOM CLI.
Log in as a user with root or administrator privileges. For example:
ssh root@
where ipadress is the IP address of the server SP.
For more information, see
The Oracle ILOM CLI prompt appears:
->
2.
To set the serial port owner, type:
->
set /SP/serial/portsharing owner=host
Note -
Connect a serial host to the server.
3.
Assign Serial Port Output Using the Web Interface
1.
Log in to the service processor Oracle ILOM web interface.
To log in, open a web browser and direct it using the IP address of the server SP.
Log in as root or a user with administrator privileges. For more information, see
Series Servers Administration
The Summary screen appears.
2.
In the ILOM web interface, select ILOM Administration --> Connectivity from the
navigation menu on the left side of the screen.
Select the Serial Port tab.
3.
74
Oracle Server X5-8 Service Manual • December 2015
ipadress
Oracle X5 Series Servers Administration
The serial port sharing value by default is owner=SP.
Guide.
Guide.
Oracle X5