Oracle X5-8 Service Manual page 60

Troubleshoot Hardware Faults
Locator Indicator On
The Locator indicator is a white combination button/indicator located on both the front and
back panels. When it is on, it blinks at the fast blink rate:
Turn it on remotely from Oracle ILOM to locate the server in a rack.
■
Typically, a server readied for service is placed in standby power mode and the Locator
indicator is turned on.
Press the button to prove physical presence. Some service procedures require you to prove
■
physical presence by pressing the Locator indicator button.
You can turn the Locator indicator off remotely from Oracle ILOM, or by pressing the
■
button.
The following figure shows the Locator indicator on the front panel:
For indicator blink rate information, see
Over Temperature Condition
For a server in an over-temperature state, the server amber over-temperature indicator and the
amber Service Action Required indicators (front and back) are on steady. The state of the front
and back green Power OK indicator and the green SP indicator depends on the severity of the
condition.
60 Oracle Server X5-8 Service Manual • December 2015
"Indicator Blink Rates" on page 62.