Table of Contents
Advertisement
10.
Lift the midplane assembly out of the server chassis from the top access
opening.
11.
Position the cables so the connectors are hanging outside of the server
chassis's side access opening.
The cables inside the chassis should lie flat, so they are not damaged during the installation of
the replacement midplane assembly.
12.
Align and position the replacement midplane assembly in the opening in the top
of the server.
Carefully lower the midplane assembly into the server until the top of the
13.
assembly is flush with the top of the server.
Replace the Midplane Assembly
Servicing Components
229
Advertisement
Table of Contents
Troubleshooting
