Oracle X5-8 Service Manual page 198

Remove the SMOD
Perform this procedure to access internal SMOD components, such as the HBA card, the
internal USB ports, the ESM, and the system battery.
Access this component directly from the rear of the server.
For component serviceability, locations, and designations, see
Before You Begin ■
Designations" on page
Obtain labels and a pen for labeling cables.
■
1. Prepare the server for cold service. See
Service" on page
Label and disconnect all cables from the SMOD.
2.
Disengage the SMOD from the server midplane.
3.
198 Oracle Server X5-8 Service Manual • December 2015
79.
98.
"Component Locations, and
"Prepare the Server for Cold