Powering On The Server For The First Time - Oracle SPARC S7-2L Installation Manual

Powering On the Server for the First Time

These topics include instructions for powering on the server for the first time and configuring
the Oracle Solaris OS.
Step Description
1. Prepare the power cords.
2. Connect a serial terminal device or terminal
server to the SER MGT Port.
3. Power on the server and start the Oracle ILOM
system console.
4. Configure the preinstalled OS, or install a fresh
OS.
5. Set the configuration parameters for the Oracle
Solaris OS.
6. (Optional) Configure the NET MGT port to use a static IP
address.
7. (Optional) Activate Oracle Auto Service Request for the
server.
Related Information
"Preparing for Installation" on page 29
■
"Installing the Server" on page 33
■
"Connecting Cables" on page 59
■
Links
"Prepare the Power Cords" on page 76
"Connect a Terminal or Emulator to the SER MGT
Port" on page 77
"Oracle ILOM System Console" on page 79
"Power on the System for the First Time" on page 80
or
"Configure the Preinstalled OS" on page 82
"Configure the Preinstalled OS" on page 82
or
"Reach a State to Install a Fresh OS (Oracle ILOM Web
Interface)" on page 84
"Oracle Solaris OS Configuration Parameters" on page 86
"Assign a Static IP Address to the NET MGT Port" on page 87
"Oracle Auto Service Request Software Activation" on page 89
Powering On the Server for the First Time 75