Table of Contents
Advertisement
Powering On the Server for the First Time
These topics include instructions for powering on the server for the first time and configuring
the Oracle Solaris OS.
Step
Description
1.
Connect cables to the server. Ensure you connect
the SER MGT port to a terminal before you
connect the power cords.
2.
If using a CMA, connect cables to it now.
4.
Power on the server and start the Oracle ILOM
system console.
5.
Configure the preinstalled OS, or install a fresh
OS.
6. (Optional)
Configure the NET MGT port to use a static IP
address.
7. (Optional)
Activate Oracle Auto Service Request for the
server.
Related Information
"Preparing for Installation" on page 15
■
"Installing the Server" on page 25
■
"Connect Cables" on page 51
■
Connect Cables
1.
Connect a Category 5 (or better) RJ-45 cable from the SER MGT port to a
terminal device.
Caution -
Do not attach a modem to this port.
Links
"Connect Cables" on page 51
"Identifying Ports" on page 55
"Secure Cables to the CMA" on page 60
"Power on the System for the First Time" on page 61
"Installing the OS" on page 62
"Assign a Static IP Address to the NET MGT Port" on page 68
"Oracle Auto Service Request Software Activation" on page 70
Powering On the Server for the First Time
51
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T8-1 and is the answer not in the manual?
Questions and answers