For instructions, see the Oracle X5 Series Servers Administration Guide at
oracle.com/goto/x86AdminDiag/docs.
"Install the SMOD" on page 200
Next Steps
■
Replace the Real Time Clock (System) Battery
Perform this procedure to replace a failed system battery (also known as an RTC battery).
This is an internal component accessed from the rear of the server by removing the SMOD.
For component serviceability, locations, and designations, see
Before You Begin
■
Designations" on page
The system battery type: CR 2032
■
Prepare the server for cold service. See
1.
Service" on page
2.
Remove the SMOD. See
3.
Set the SMOD on a flat surface with the back side facing toward you.
79.
98.
"Remove the SMOD" on page
Replace the Real Time Clock (System) Battery
"Component Locations, and
"Prepare the Server for Cold
197.
Servicing Components
http://www.
219
Need help?
Do you have a question about the X5-8 and is the answer not in the manual?