Oracle X5-8 Service Manual page 99

A cold-service component must be serviced when the server is completely powered off.
For more information about component serviceability, see
Requirements" on page
This procedure describes how to prepare the server for service, so you can:
Remove, replace, or install cold-serviceable components.
■
Use the motherboard processor and DIMM fault remind circuitry.
■
Access internal components, such as the internal USB drives.
■
Important: Review the
Before You Begin ■
before performing removal and installation procedures.
To power down the server and activate the front panel Locator indicator, do the
1.
following:
a. Log in to the Oracle ILOM web interface.
Direct a web browser to Oracle ILOM using the IP address of the server SP and log in as
root or a as user with administrator privileges. See
Series Servers Administration
b. In the Actions section of the Summary screen, click the Power State Turn Off
button.
This action powers off the server to standby power mode. For more power off options, see
"Powering Off the Server" on page
c. In the Actions section of the Summary screen, click the Locator Indicator
Turn On button.
79.
Oracle Server X5-8 Product Notes
Guide.
100.
Prepare the Server for Cold Service
"Component Serviceability
for hardware-related information
"Accessing Oracle ILOM" in Oracle X5
Preparing for Service 99