Powering On The Server - Oracle X5-2 Installation Manual

Powering On the Server

Use a Velcro strap to secure the power cords to the power supply handle as shown in the
following figure.
Caution -
top cover are installed. Damage to server components can occur if the server is operated without
adequate cooling mechanisms.
Powering On the Server
This section explains how to power on the server locally using a serial connection and Oracle
ILOM.
If you want to power on the server remotely using an Ethernet connection and Oracle ILOM,
see "Log In to Oracle ILOM Using a Remote Ethernet Connection" on page 85
instructions.
80 Oracle Server X5-2 Installation Guide • January 2021
Do not operate the server unless all fans, component heak sinks, air baffles, and the
for