Switches And Buttons - Oracle X5-8 Service Manual

Server Subsystems

Switches and Buttons

When you are at the server, the following switches and buttons are accessible:
Front panel Power button
■
Allows you to control server power while local to (at) the server. For power off information,
see
the Server" on page
Two Locator indicator buttons (one on the front of the server and one on the back)
■
The buttons allow you to manage the Locator indicator locally. To deactivate (or
activate) the Locator indicator, press and release the button (see
Indicator" on page
Service processor (SP) pinhole reset button on the back of the server
■
The SP reset button allows you to manually reset the SP. Use the reset button if the SP
becomes unresponsive, requires a reset, or fails to boot into standby power mode (activating
the button requires the use of a stylus).
For location information, see
Host pinhole reset button on the back of the server
■
42 Oracle Server X5-8 Service Manual • December 2015
"Powering Off the Server" on page
236.
108).
100. For power on information, see
"Back Indicator Panel" on page
"Power On
"Managing the Locator
39.