Turn On The Locator Indicator Remotely (Oracle Ilom Cli) - Oracle X5-8 Service Manual

"Turn On the Locator Indicator Remotely (Oracle ILOM CLI)" on page 109
■
"Turn On the Locator Indicator Remotely (Oracle ILOM Web Interface)" on page 110
■
"Control the Locator Indicator Locally" on page 110
■
Turn On the Locator Indicator Remotely (Oracle
ILOM CLI)
Before going to the server, you can activate the server Locator indicator to help you identify the
server in the rack.
Open an SSH session and at the command line log in to the SP Oracle ILOM CLI.
1.
Log in as a user with root or administrator privileges. For example:
ipadress
ssh root@
where ipadress is the IP address of the server module SP.
For more information, see
Administration Guide.
The Oracle ILOM CLI prompt appears:
->
2. To turn on the Locator indicator, type the following command at the prompt:
set /System/ locator_indicator=on
To turn off the Locator indicator, type:
Note -
3. To verify the status of the Locator indicator, type:
show /System/ locator_indicator
The output of the command appears:
/System
Properties:
locator_indicator = Off
The value locator_indicator shows the status as either On or Off.

Turn On the Locator Indicator Remotely (Oracle ILOM CLI)

"Accessing Oracle ILOM" in Oracle X5 Series Servers
set /System/ locator_indicator=off
.
Preparing for Service 109