Install the HBA Card
3.
Connect the two backplane cables to the connectors on the HBA card [1].
Align the connector on the HBA card with the PCIe slot on the SMOD
4.
motherboard and then push the HBA card into the slot [2].
Lock the card and secure the lever (3).
5.
a.
To lock the card, rotate the green locking lever upward.
b.
Rotate the lever inward so it tucks inside the SMOD frame and does not
extend outward.
Ensure that the cables pass through the cable guides on the edge of the SMOD
6.
(4).
7.
Connect the ESM extension cable to the connector on the HBA (5).
8.
Install the storage drives. See
9.
Clear any related component faults. For more information see
Fault Messages" on page
"Install the SMOD" on page 200
Next Steps
■
208
Oracle Server X5-8 Service Manual • December 2015
"Install a Storage Drive" on page
92.
182.
"Clear Hardware