Oracle System Assistant, if present, is installed in the upper slot (USB port 0)
"Install the SMOD" on page 200
Next Steps
■
Install an Internal USB Drive
Perform this procedure to access and install internal USB flash drives.This is an internal
component accessible from the rear of the server by removing the SMOD.
For component serviceability, locations, and designations, see
Before You Begin
■
Designations" on page
Prepare the server for cold service. See
1.
Service" on page
Remove the SMOD. See
2.
79.
98.
"Remove the SMOD" on page
Install an Internal USB Drive
"Component Locations, and
"Prepare the Server for Cold
197.
Servicing Components
217