Turn On The Locator Indicator Remotely (Oracle Ilom Web Interface); Control The Locator Indicator Locally - Oracle X5-8 Service Manual

Turn On the Locator Indicator Remotely (Oracle ILOM Web Interface)

Turn On the Locator Indicator Remotely (Oracle
ILOM Web Interface)
Before going to the server, you can activate the server Locator indicator to help you identify the
server in the rack.
1. Log in to the service processor Oracle ILOM web interface.
To log in, open a web browser and direct it using the IP address of the server SP. Log in as root
or a user with administrator privileges. See
Servers Administration
The Summary screen appears.
2. In the Actions section, verify that the Locator indicator is off, and then click the
Turn On button.
3. Click OK.
The Locator indicator on the Summary screen changes to indicate the status of the Locator
indicator.

Control the Locator Indicator Locally

Note -
panel.
Use this procedure to turn off or to turn on the Locator indicator.
110 Oracle Server X5-8 Service Manual • December 2015
Guide.
This procedure is performed locally and requires physical access to the server front
"Accessing Oracle ILOM" in Oracle X5 Series