Power On The Server - Oracle X5-8 Service Manual

Power On the Server

Note -
their fault indicators. For details, see
Power on the server.
7.
"Power On the Server" on page 236
Next Steps ■
Power On the Server
When AC power is applied to the server power inlets, the server boots into standby
power mode. For information, see
Indicators" on page
Use the following procedure to reapply main power for all server components.
Ensure that the server is in standby power mode.
1.
2. To power on the server, do one of the following:
From the front of the server, press and immediately release the Power
■
button on the server front panel.
From the Oracle ILOM web interface Summary (home) screen, click Power
■
State Turn On button.
From the Oracle ILOM command-line interface (CLI), type:
■
start /System
Note -
complete.
236 Oracle Server X5-8 Service Manual • December 2015
After replacing some components, you must clear their fault in Oracle ILOM to clear
59.
When the server powers on, the power-on self-test (POST) can take several minutes to
"Clear Hardware Fault Messages" on page 92
"Server Boot Process and Normal Operating State