Oracle X5-8 Service Manual page 97

Caution -
CMODs and their subcomponents while the server is in warm service mode.
Caution -
is in full power mode. This action removes power from the CMODs and causes an immediate
shutdown. On an eight-CMOD system, this applies to all fan modules. On a four-CMOD
system, this applies to the fan modules in the left-hand fan frame.
Important: Review the
Before You Begin ■
before performing removal and installation procedures.
To power down the host and activate the front panel Locator indicator, do the
1.
following:
a. Log in to the Oracle ILOM web interface.
Direct a web browser to Oracle ILOM using the IP address of the server SP and log in as
root or a as user with administrator privileges. See
Series Servers Administration
b. In the Actions section of the Summary screen, click the Power State Turn Off
button.
This action powers off the server to standby power mode. For more power off options, see
"Powering Off the Server" on page
c. In the Actions section of the Summary screen, click the Locator Indicator
Turn On button.
Loss of service or component damage. Do not replace any components except for
Data Loss. Do not remove more than one fan module from a column while the system
Oracle Server X5-8 Product Notes
"Accessing Oracle ILOM" in Oracle X5
Guide.
100.
Prepare the Server for Warm Service
for hardware-related information
Preparing for Service 97