Oracle X5-8 Service Manual page 55

5. Service components.
To service the components, see the removal, installation, and replacement procedures in this
document.
Note -
Contact Oracle Service.
6. Clear the fault in Oracle ILOM.
Depending on the component, you might need to clear the fault in Oracle ILOM. Generally,
components that have a FRU ID clear the fault automatically.
See Also:
"Troubleshoot Hardware Faults" on page 55
■
Troubleshoot Hardware Faults
Note -
This procedure uses the basic troubleshooting steps described in
Steps" on page
Use this procedure to troubleshoot hardware faults with the Oracle ILOM web interface and, if
necessary, prepare the server for service.
Note -
a combination of the Oracle ILOM web and CLI interfaces. However, the procedure can be
performed using only the Oracle ILOM CLI interface. For more information about the Oracle
ILOM web interface, refer to the Oracle ILOM documentation.
Obtain the latest version of the
Before You Begin ■
1. Log in to the server SP Oracle ILOM web interface.
Open a browser and type in the IP address of the server SP. Enter a user name (with
administrator privileges) and password at the log-in screen. The Summary screen appears.
The Status section of the Summary screen provides information about the server subsystems,
such as:
Processors
■
A component designated as a FRU must be replaced by Oracle Service personnel.
The screens and information in this procedure might differ from those for your server.
54.
This procedure provides one basic approach to troubleshooting hardware faults. It uses
Oracle Server X5-8 Product
Troubleshoot Hardware Faults
"Basic Troubleshooting
Notes.
Troubleshooting and Diagnostics 55