Procedure Moving A Drive; Procedure Powering Off Application Server - Oracle Tekelec 1200 Maintenance Manual

Platform Maintenance
4. Choose Yes to confirm
Caution: To prevent any possible data loss, back up user data to another storage
device prior to replacing a disk drive
Procedure Moving a Drive
Caution: When moving or replacing a hard drive, make sure that:
• All I/O is stopped
• The "Periodic Drive Check Time" setting in the firmware application is set to disabled (this is the
default setting). This prevents automatic drive rebuild, which is not recommended for live systems
or troubleshooting
1. Check the physical drive parameters using the firmware application.
2. From the firmware Main Menu, choose view and edit the SCSI drives
Procedure Powering off Application Server
Use the Remote Management Module to power off the T1200 AS.
1. To open the console:
• select Remote Control and click the KVM Console submenu or
• click the the console icon in the Remote Console Preview window
910-5680-001 Revision F, February 2014
Hardware Diagnostics and Troubleshooting
34