Powering Down The Server - Oracle X7-8 Service Manual

Powering Down the Server

4. In the Actions section of the Summary Information page, click the Locator
Indicator Turn On button.
This action activates the Locate Button/LED indicator LED on the server front panel. For other
options, see
Click OK.
5.
6. Once at the service location, press the Locate Button/LED button to deactivate
the indicator.
For more information, see
Disconnect the four server power cords from the AC power block.
7.
Caution -
in an immediate shut down of the server. Do not remove the power cord if the server is in Main
power mode. Power off the server to Standby power mode first.
Set up an ESD-safe space at the service location.
8.
Set up a space where you can place components. See
Prevention Measures" on page
Perform cold-service removal and installation procedures on components.
9.
See "Servicing Components" on page
Powering Down the Server
Determine how you want to power off the server by reviewing the options in the following
table.
Description
Power off the server gracefully to prevent data
from being corrupted. Performing a graceful
shutdown ensures that the system is ready for
restart.
If the server is not responding, or you must
shut down the server quickly, perform an
immediate shutdown.
110 Oracle Server X7-8 Service Manual • April 2018
"Managing the Locate Button/LED" on page
"Control the Locate Button/LED Locally" on page
Data loss. Removing the power cords when the server is in Main power mode results
97.
119.
"Electrostatic Discharge and Static
123.
Link
■ "Power Off the Server Gracefully (Oracle ILOM
CLI)" on page 111
■ "Power Off the Server Gracefully (Oracle ILOM Web
Interface)" on page 112
■ "Power Off the Server Gracefully (Power
Button)" on page 113
■ "Power Off the Server for Immediate Shutdown (Oracle ILOM
CLI)" on page 114
■ "Power Off the Server for Immediate Shutdown (Oracle ILOM
Web Interface)" on page 115
121.