Oracle X5-8 Service Manual page 174

Install a Heatsink and Processor (FRU)
positioning the tool and the CPU with the CPU socket. The tool and the CPU are correctly
positioned with the socket when all of the triangles are aligned.
b. Turn the replacement tool upside down, noting the corner of the tool that is
marked with a triangle (alignment key).
c. Note the corner of the CPU that is marked with a triangle (alignment key).
d. Lift the CPU by its edges, taking care not to touch the metal contacts on the
underside of the CPU.
e. Turn the CPU upside down (metal contacts facing upward) and set it on
the replacement tool, ensuring that the triangle on the CPU aligns with the
triangle on the tool and that the CPU sits flat in the tool. Do not release your
hold the CPU.
The CPU is not yet secured in the tool.
With the tool and the CPU in the topside down position, press the topside
f.
release tab outward, away from the center button.
This action is accompanied by a click sound as the tool closes and grabs the CPU. The
CPU should now be secured in the tool.
g. Ensure that the CPU is secured in the tool.
When the CPU is secured in the tool, there is no side-to-side movement of the CPU within
the tool.
3. Turn the tool over, so that the CPU contacts are facing downward.
This positions the tool with the topside facing upward.
4. Orient the tool so that the triangle on the tool aligns with the triangle on the
socket.
5. Lower the tool onto the socket, ensuring that the CPU is correctly positioned and
sits flat and evenly in the socket.
174 Oracle Server X5-8 Service Manual • December 2015